Don`t pay a garage HUNDREDS of dollars/pounds/euros to do this work for you! With this video you can easily do the work yourself in a day by following our video.
Welcome to this special Total Technik PROJECT video in which we will show you how to remove your Rear Bumper from your Audi A6/S6/RS6 (C5)...
In this video we`ll show you the easiest DIY method to remove your rear bumper quickly and safely.
We will take you through the process step by step, showing you literally every nut, bolt or clip as we progress. All you need to do is follow along!
We`ll go in-depth and show you exactly how each piece is attached, where the fixing points are located, and the safest and easiest way to remove them.
When it comes to the rear bumper removal, it`s not amazingly complex (making it an ideal DIY project!) but there is quite a lot to be done, which is why if you get a garage or mechanic to undertake the work for you the bill you`ll get back could be a lot bigger than you might initially think!
Remember. when paying a garage/mechanic you are paying for their time, regardless of how easy or difficult the work. The rear bumper removal process does take time to do, but is not all that complex provided you do it in the right way - which makes it an ideal job for doing at home yourself where you can spend your own time, without spending $50/£50 an hour on labour charges!!
We`ll also share with you a few extra hints, tips and shortcuts that we`ve picked up over the years having removed dozens of these bumpers. It takes repeated experience to learn the easiest methods, and we`ll share all we know with you in this video!
Check out the trailer for a great overview of what this video will cover.
--------------------
IMPORTANT:
This is for the following models only:
Audi A6, S6 and RS6 (C5 1997-2005)
The video is primarily for the Avant model. However, the saloon (sedan) process is almost identical. The main difference being the boot (trunk) wall panel removal process is a touch different - but the basic principal is identical! So there should be MORE than enough info here for any saloon owner with a touch of common sense to get their bumper removed quickly and easily.
--------------------
Help support the Total Technik project by buying this video!
Thank you!
Looking for tools?
USA: https://www.amazon.com/shop/totaltechnik
CANADA: https://www.amazon.ca/shop/totaltechnik
UK & EU: https://www.amazon.co.uk/shop/totaltechnik
VIDEO BY TOTAL TECHNIK
Our range of Total Technik project video’s offer our most in-depth content and are aimed at saving you money!
The content of our Project Video’s should save you hundreds (if not thousands!) of Pounds/Dollars in garage fee’s by empowering you with the knowledge required to undertake the work yourself!
Once purchased, this Project video can be re-watched… as many times as you like for 180 days - so plenty of time to plan and complete your project!
Buying our project video’s also helps to support Total Technik and ensure the ongoing production of future content!
So don’t delay - order now!
Comments
ilya P Sichkar - How to Remove Clutch Pedal Sensor A4
Chris Nichols
Mirnes Kovacevic - How to Remove Climate Control
Adam Buttery
Keang family
MrBaysent
[I./JG62]froNt
Millwood Drivers_network
luvette
Piotrek sierrafreak
PJ
A. W. Thompson
Gavin Robinson
Nathaniel Kren
paul wheeler
cpahitman1 - How to Remove Boot Trunk Lock
D&J Automotive
Frank Horvath
Robert Oakley
matthew miller
Byron Buckett
Alex Becker
Damon Pap
Roman Stativka
Peace Dog
RONALDO REVON MARTIN
cainoxcx6
Steven Brogan
Losee Rich
Karl
Tord Andreassen
Tomble Weed
cnoel74
Itchy Scratch
Andy Lyndon
oj popovici - How to Remove Door Card Panel
Martin Laursen
Ash
Jatin Shetty
riaz shamsudeen
Zarock
Taximan
HatBoyHarvey
Jim Ragland
NonnoJaco
beckass108
Byron Buckett
toastedoat
cumbria cam
FTMJarra
Chris Dunham
Nitro 182
Andrew Amess
Andy Emblin
Alan Webb
Ross Janoch
steelydan133
FX W